Title: Dilution and partial periods (Adjusting the Period Hours method, Percentage of Period Pay)
When you hire or terminate an exempt employee mid-time period or when an exempt employee has uncompensated leave within a period, by default, Unanet will adjust the employee’s cost rate based on the hours worked against the hours in the time period resulting in an inflated cost rate for that individual. This document describes the process for calculating the correct hours in the period as a percentage of the period worked to replace the default hours for the employee.
This method works when an exempt employee is paid a percentage of their salary based on the hours worked over the business hours in the period. Note that some organizations pay the exempt employee’s straight hourly rate when partial periods are worked. Please refer to the Quick Topic - Dilution and partial periods (Straight Pay) for the configuration of the straight pay method of compensation.
Note that there is another method that also pays a percentage of the period pay, Quick Topic - Dilution and partial periods (Uncompensated Leave Pay Code, Percentage of Period Pay).
What’s covered in this document:
The following steps outline the process for calculating the expected dilution period for a salaried new hire, termination mid-period or employee with uncompensated leave. This process should be followed after the timesheet has been approved and is in a COMPLETED or LOCKED status but before the timesheet is EXTRACTED.
Assess the following values:
The ADJUSTED PERIOD HOURS are entered into the HOURS IN PERIOD field of the employee’s Dilution screen in the person profile. (http://help.unanet.com/current/unanet_menu/people/people_dilution.htm). Following this process will ensure the employee’s adjusted cost rate is accurate.
In a semi-monthly time period, the standard dilution hours are set to 86.667. Within a given period, a new-hire works 7 of 10 working days. Let’s assume the standard work day is 8 hours.
|A||HOURS WORKED||8 hours * 7 days||56 hours|
|B||BUSINESS HOURS||8 hours * 10 days||80 hours|
|C||PERCENTAGE OF PERIOD||56 hours worked/80 hours in period||.7|
|D||ADJUSTED PERIOD HOURS||86.667 dilution period default *.7 percent of time period worked||60.6667|
In a biweekly time period, the standard dilution hours are set to 80. Within a given period, a new-hire is employee for 4 of 10 working days in the period. The employee is expected to work 8 hours a day.
8 hours * 4 days
8 hours * 10 days
PERCENTAGE OF PERIOD
32 hours worked/80 hours in period
ADJUSTED PERIOD HOURS
80 dilution period default *.4 percent of time period worked
One concern with this process is that the Unanet Administrator or client Payroll Manager is unaware of the situation and that the user timesheet is completed and time is diluted prior to this setting being in effect. Recalculation is always a possibility, but a stored procedure may help to reduce the possibility of missing the scenario.
A stored procedure is a customized script that runs on the Unanet database and validates entries to the timesheet or expense report. In this case, the validation would be a Save validation warning and Submit validation warning on the timesheet.
For a new hire, the stored procedure would be set up to trigger if the user Hire Date field was populated with a date within the time period and the hours worked are less than the business hours in the period. Special exceptions would need to be accounted for if the Hire Date was on the first weekday of the time period and therefore all normal business hours were included in the dilution period. The Save and Submit message would be a warning to indicate to the user that he should contact the System Administrator to review the dilution settings.
Unanet does not track Termination Dates as a standard field, but if validation on termination is necessary, it would be possible to set up a Person user-defined field (UDF) to enter a Termination Date. The validation routine would be very similar for the termination, with special exception if the Termination Date is on the last weekday of the time period. The client will need to determine if the Termination Date can be identified and entered into Unanet in a timely fashion in order to make the stored procedure routine viable in their environment.
If a stored procedure is desired, the client should contact their Customer Account Manager or implementation consultant.
KC - FAQ - Dilution and Partial Periods - Handling New and Terminating Salaried Employees
KC - FAQ - What are Business Rules Enforcement and Validation Stored Procedures?
Help Docs - Validation Stored Procedures for Time Users
Help Docs - Validation Stored Procedures for Expense Users
Help Docs - Validation Stored Procedures for Manager Time Approvers (Preview Approval Screen)